Now reserving Spring 2027 cleanings. Get your quote today, pick your spot on the spring schedule — no deposit, and 2026 customers choose their dates first.Spring 2027 cleaning is now reserving.
Reserve my spotYou’re viewing
Care for what rain leaves behind.
Most Wisconsin panels need very little maintenance, and rain handles loose dust. But pollen film, bird droppings, farm dust, and leaf debris stick. If you can see it on your panels, it’s blocking sunlight. My method: 100% deionized water and a motorized rotary brush — with a biodegradable, panel-specific soap when heavy soiling needs it. No harsh chemicals, no abrasives, warranty-safe. No pressure washing, no walking on your panels — on the roof when the job needs it. Send your address and rough panel count and I’ll reply within 24 hours.
Southern Wisconsin's dedicated solar panel cleaning company — no installs, no sales. Cleaning only. Owner-operated. I do every job myself.
Use my instant calculator — no contact info required to see your estimated range.

Marquis Mason — owner-operator5.0 stars · 19 Google reviews
This past May, a single 30-minute cleaning I did at the Wisconsin State Capitol measured 16.7% more sunlight reaching the glass.
Do your panels need it?
If your panels look clean from the ground and production matches last year, you probably don't need me yet. Cleaning usually pays off when:
You're near farms or gravel roads
Harvest and field dust builds up fast, and rain doesn't lift it.
Birds like your roof
Droppings block light completely and bake on in summer heat.
You have heavy tree cover
Pollen, sap, and leaves collect along panel edges.
Your panels are low-tilt or flat
Water and dirt sit on the glass instead of running off.
It's been 2+ years with no cleaning
Film builds slowly enough that most owners never notice.
Most people don't think about their panels once they're up — and mostly, that's fine. But panels live outside, and what lands on them doesn't all wash off. A cleaning isn't about chasing a number on your app. It's basic care for one of the most expensive things on your home.
Dirt settles heaviest along the frames and the bottom edge, where it bakes into a hard ridge. I clean every panel edge to edge, so nothing is left sitting on the glass season after season.
One dropping shades a single cell, and that cell runs hot while the rest of the panel works around it. Through a summer they bake on hard. Getting them fully off protects the panel — it's care, not cosmetics.
Panel manufacturers publish cleaning instructions because they expect the panels to be cleaned now and then. My method follows what they publish: 100% deionized water and a motorized rotary brush — with a biodegradable, panel-specific soap when heavy soiling needs it. No harsh chemicals, no abrasives, warranty-safe. No pressure washing, and I never walk on your panels.
Every visit I look the system over — buildup, debris, anything that looks off — and you get before-and-after photos, every time. If I ever see something beyond cleaning, I'll show you the photo and tell you plainly. No upsell; I don't sell anything else.
Most homes do well with a cleaning on a regular schedule — after pollen season, before the heavy sun months. Annual and bi-annual plans are just that rhythm kept for you, so the panels never go years quietly building film. The savings are real, and I'll show you your own before-and-after readings — but the point of the schedule is the same as servicing anything you plan to keep for 25 years: it lasts longer and works the way it should.
Solar panel cleaning in Wisconsin, timed to the season
A dirty May costs you peak-sun weeks you never get back. One spring cleaning protects the months that matter most.
Soiling film is invisible from the ground. I can meter your array before and after so you see exactly what came back. No guessing.
A typical Wisconsin home system loses an estimated $80–$250 a year to soiling. Over 25 years, that’s $2,000–$6,250 in lost production — against a $150–$215 cleaning.
Installers sell “maintenance-free.” Panel manufacturers publish cleaning instructions that say otherwise.
See your price in seconds with my Instant Price Calculator.
Instant Price CalculatorBooking Spring 2027 Priority Slots Now — lock in your spring post-pollen window and check your array's price below.
I looked at my own solar panels every day for years and thought they were fine. Same weather, same panels, same sun, but the meter told a different story the day after I finally cleaned them. Production went from 68.1 kWh on May 7 to 83.3 kWh on May 8, a +15.2 kWh (+22%) lift the very next day. One day isn't a formal scientific test, but the trend held through the following weeks and it was too big to un-see. That number is why Solar Alchemist exists.
“I stared at my panels every day and swore they were fine. Then I cleaned them and watched my production jump 22% the next morning. I had no idea how much power I was losing to dirt I couldn’t even see. That’s the day this stopped being an idea and became a company.”— Marquis Mason, Founder, Solar Alchemist · Madison, WI · May 2025
+22%
Next-day production lift
+15.2 kWh
Recovered daily output
1 visit
Measurable difference on the app
I’ve since taken this same rig and warranty-safe method to jobs at the scale of the Wisconsin State Capitol — whether it’s a rooftop of 24 panels or a state icon, same operator, same care.

Warranty-Safe Method
Lifts What Rain Can’t
A Paper Trail Every Visit
100% Deionized, Spot-Free Finish
Curious what a single cleaning costs? My Instant Price Calculator shows your price in seconds on my pricing page.
From first message to clean glass with a paper trail, usually inside a week.
Just a rough number works. Use my calculator or text me. No contact info required to see your estimated range.
I size your array via satellite imagery, no mandatory site visit, no obligation. Final quote in 24 hours.
Cool glass, cloudy days encouraged. Before-and-after photos every visit.
See your price in seconds with my Instant Price Calculator.
Instant Price CalculatorPartly. Rain handles loose dust well, that's why most Wisconsin panels stay in decent shape. What rain can't lift is pollen film, bird droppings, farm dust, and debris along the bottom edge of low-tilt panels. Manufacturers like Qcells agree rain usually handles dirt but say panels shaded by bird droppings or debris need cleaning. If you can see buildup on your panels after a rain, rain isn't removing it.
100% deionized water and a motorized rotary brush — with a biodegradable, panel-specific soap when heavy soiling needs it. No harsh chemicals, no abrasives, warranty-safe. No pressure washing, no foot traffic on the glass. My method follows the cleaning process every major panel manufacturer publishes, so your warranty stays intact and the DI rinse leaves zero mineral residue.
Try the free calculator on /pricing (Residential tab), enter panel count and home style and you'll see your estimated range in seconds, no contact info required. Commercial, agricultural, and government sites are custom-bid, share a few site details on the Commercial tab and I'll personally email you a written bid within 24 hours.
Running a commercial site near Lake Michigan? See Milwaukee solar panel cleaning.
11 counties across Southern Wisconsin, Madison to Lake Michigan
Based in Dane County · serving all of Southern Wisconsin